The Mantle Base and Cartridge System, designed to keep the work area tidy, cleaner and safer for the tattooist and their customers. This design of Stand holds the tattooing machine by it's nozzle/tip keeping it and the needle clean and safe from dirt, dust and damage whilst in the rest position. It also holds the tattooing machine in a way that allows the tattooist to pick their machine up in one swift movement ready to work.

• The Mantle System keeps the tattooists tattooing machines neat and tidy on the work area, free from dirt, dust and any other floating debris.
  
  
• Nozzles/tips and needles are protected from damage whilst in the rest position, allowing the customer or tattooist to take a break with the reassurance that the tattooing machines are safe and clean.
  
  
• The tattooing machine sits in the Mantle Base and Cartridge System in such a manner that the tattooist can grab the machine grip in the working position. They can then remove the tattooing machine from The Mantle Cartridge and be ready to start tattooing, not having to adjust the tattooing machine by handling it too much, keeping the spread of contamination to a minimum. The Mantle is sturdy enough for the tattooist to clip their power lead to a tattoo machine before removing the machine from The Mantle, this can all be done with one hand.
  
  
• The Tattoo Machines all hang in the same manner whilst in The Mantle System. The angle helps the insertion and removal of the tattooing machines from the cartridges.
  
  
• The position of the tattooing machines in The Mantle System helps to cool them in an even manner after running hot. Allowing the tattooing machine coils to cool evenly.
  
  
• You can move The Mantle System around fully loaded with your tattoo machines, as long as you hold it in the working plane, it's great for when you want to take your machines to your cleaning area all in one go! So... keep it level as you move it, if you tilt it to far your machines could fall out.
  
  
• The Mantle System is great for Tattoo Conventions. If your a tattoo Artist that shows your skills at Tattoo Conventions, this system will help you create a tidy work station and your machines will look at their best whilst people are on-looking.
  
  
• The Mantle System is designed to be easily maintained. The Mantle Cartridges are disposable and must not be used for more than one customer. You can insert your machines in and out of the cartridges as many times as you need, but you must change to new cartridges for the next customer, never try to clean them and make sure to dispose of them in the correct manner after tattooing is finished. If a cartridge becomes dirty maybe through ink build up, then replace it for a new one. The Mantle Base can be autoclaved or cleaned with sterile wipes/cleaner. It can also be wrapped in cling-film before the Mantle Cartridges are inserted